Two convienent Pickup Locations in
Hackensack, NJ & Greenpoint (Brooklyn)

Servicing NY/NJ & Beyond!

AT- PRO35

$35.00

  • UniMount® clip permits accurate positioning, provides shock resistance and protects element
  • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
  • Extended frequency response captures subtle nuances of the performance
  • 6′ (1.8 m) cable permanently attached to microphone

 

Microphones
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 50-15,000 Hz
Low Frequency Roll Off 80 Hz, 18 dB/octave
Open Circuit Sensitivity -45 dB (5.6 mV) re 1V at 1 Pa
Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 115 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 64 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Switches Flat, roll-off
Weight (Microphone) 0.3 oz (8 g)
Weight (Power Module) 2.9 oz (81 g)
Cable 6.0′ (1.8 m) long (permanently attached to microphone), 0.10″ (2.6 mm) diameter, 2-conductor, shielded cable with TA3F-type connector
Dimensions (Power Module) 3.66″ (92.9 mm) long, 0.74″ (18.9 mm) diameter
Dimensions (Microphone) 0.98″ (25.0 mm) long, 0.40″ (10.2 mm) diameter
Output Connector (Power Module) Integral 3-pin XLRM-type
Accessories Included AT8418 UniMount® microphone instrument mount; AT8538 power module; soft protective pouch
Audio-Technica Case Style M12
Categories ,